The bungee on my stick mid 80 Nacra got scuffed by the casting and broke through the cover. Rather than run the bungee from rudder to end of tiller arm, has anyone used a length of small diameter line or stsinless cable from the rudder into tje tiller arm tibe, so there is no shock cord exposed? Seems like it ought to work, even giving up a bit of eladtic cotd length. Thanks.
--
John
Nacra 5.0
CT
--
Nacra Rudder All Internal Bungee Mod???
-
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Mar 20, 2022 - 07:43 PM
-
- Rank: Lubber
- Registered: Sep 24, 2021
- Last visit: Apr 09, 2022
- Posts: 40
Posted: Mar 20, 2022 - 09:31 PM
Interesting thought John. Two questions come to mind…
1) Are you using a section of 1” tubing on the bungee between the end of the tiller tube and the rudder?
2) If you used hard cable at the rudder it seems you’d add wear to the top of the rudder where the bungee rides when the rudder is in the down position. -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Mar 20, 2022 - 10:10 PM
I have not used a tube over the bungees. Good idea.
--
John
Nacra 5.0
CT
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Mar 21, 2022 - 05:11 PM
I wouldn’t bother. Using SS cable will quickly wear the rudder blade, you would need some sort of bushing in the blade.
If you wear bungee cover,you’ll wear line.
The 1” of tubing carbonc mentions is not to prevent bungee chafe, it serves to stop the rudder from banging against the end of the tiller tube- you can see the damage to my blade in one of the photos.
I solved this problem years ago, with very little effort, & zero cost. Here’s a couple photos from my N5.7 album. Tap the photo after opening the link to get the full size photo. I can’t figure out how to directly insert the photo from an iPad…there is no right click-“copy link location”
https://www.thebeachcats.…d5da9872faca9d74eccb7cba
https://www.thebeachcats.…00efffe85580c8adee485a14
Edited by Edchris177 on Mar 21, 2022 - 05:19 PM.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Mar 22, 2022 - 05:22 AM
Thanks. Mine has the same notch cut in from up position contact. West time.
I may add a roller for the pull down line pivot
--
John
Nacra 5.0
CT
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Mar 24, 2022 - 09:25 AM
What size and material tube works best? I will prob run 5/16 bungee
--
John
Nacra 5.0
CT
-- -
- Rank: Mate
- Registered: Jul 29, 2015
- Last visit: Jul 26, 2024
- Posts: 590
Posted: Mar 24, 2022 - 12:06 PM
My rudder is still using the original cushion/tube. It's a little larger in diameter than the tiller arm, but not a precision part.
--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Mar 26, 2022 - 07:47 AM
Go to your local Home Depot, Harbour Freight, or any place that has tubing, & ask for 3”. I used a clear Tube with nylon reinforcement, about the diameter of the tiller tube.
A scrap from any 1” water hose will work.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
--
