Has anyone ever replaced chain plates on there cat?
“Prindle 18-2” in particular. I am recoreing the decks and Planning on installing new chain plates while I have it opened up.
Any words of advice, would be much appreciated.
Thanks
Prindle chainplate question
-
- Rank: Lubber
- Registered: Apr 02, 2022
- Last visit: Sep 25, 2022
- Posts: 12
-
- Rank: Lubber
- Registered: Jul 11, 2014
- Last visit: Mar 18, 2024
- Posts: 80
-
- Rank: Mate
- Registered: Aug 13, 2017
- Last visit: Aug 22, 2024
- Posts: 281
If it ain't broke, don't fix it!
--
Brgds
Lars
Frankentri 5.8/5.5/Inter20
Aerow trimaran foiler
https://www.facebook.com/groups/1192604934176635
-- -
- Rank: Lubber
- Registered: Apr 02, 2022
- Last visit: Sep 25, 2022
- Posts: 12
Thanks for your input fellas !
I will do a good visual inspection when I open up the deck, and if all looks good I will close the deck back up with ultra light core cell foam and fiberglass. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
I went through the trouble to remove both bow decks when 1 bow tang failed
also broke through a (second) bulkhead to replace both side-tangs when 1 chainplate/tang failed
it may not be a bad idea to replace when you have access as preventative maintenance - esp if the cat was used in salt water
Edited by MN3 on Apr 05, 2022 - 08:01 PM. -
- Rank: Mate
- Registered: Feb 28, 2018
- Last visit: Dec 12, 2024
- Posts: 148
On a boat this old? It would probably be smart preventive maintenance. You will have to get some fabbed up though
--
Captain Chris Holley
Fulshear, TX
'87 Prindle 19 "¡Hijole!"
'74 sunfish "1fish"
-- -
- Rank: Lubber
- Registered: Apr 02, 2022
- Last visit: Sep 25, 2022
- Posts: 12
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.