Prindle 16 Mainsheet
-
- Rank: Lubber
- Registered: Jun 11, 2022
- Last visit: Jun 17, 2022
- Posts: 4
Posted: Jun 11, 2022 - 07:52 PM
I just picked up a Prindle 16. Don't know much about sailing but from what I remember they all have some type of pulleys on the mainsheet but this had nothing like that in the bucket of stuff it came with. Can anyone provide a picture of a properly rigged Prindle 16 Mainsheet? -
- Rank: Lubber
- Registered: Oct 16, 2021
- Last visit: Jun 12, 2023
- Posts: 34
Posted: Jun 11, 2022 - 08:53 PM
Here is a link to the manual'
https://www.thebeachcats.…pictures?g2_itemId=75669
Main sheet and blocks from the manual
https://www.thebeachcats.…97a73695374515c91cafc260 -
- Rank: Mate
- Registered: Sep 01, 2002
- Last visit: Nov 30, 2024
- Posts: 797
Posted: Jun 13, 2022 - 12:56 PM
This should help with your first question, and your additional question on how do I do it
https://www.youtube.com/watch?v=YojZ-gjrc90
--
John Schwartz
Ventura, CA
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: Dec 04, 2024
- Posts: 7090
Posted: Jun 13, 2022 - 04:01 PM
go find local sailors (online? at the beach? at the local launch?) ask a question or 2 (million)
go crew at first chance
go race at first chance
have fun! -
- Rank: Lubber
- Registered: Jun 11, 2022
- Last visit: Jun 17, 2022
- Posts: 4
Posted: Jun 17, 2022 - 08:21 AM
Thank you -
- Rank: Lubber
- Registered: Jun 11, 2022
- Last visit: Jun 17, 2022
- Posts: 4
Posted: Jun 17, 2022 - 08:25 AM
Thank you. -
- Rank: Lubber
- Registered: Jun 11, 2022
- Last visit: Jun 17, 2022
- Posts: 4
Posted: Jun 17, 2022 - 03:23 PM
I know this is wrong. Everything I see says the tail end of the main sheet should feed through the swiveling camcleat and guide on the centerline then go through the traveler then through the fitting on the crossbar and then get knotted. All of the instructions showing that show a traveler that has rollers for the line to roll over. Mine does not. Do I just pass it through anyway and not worry about chafing as it passes through?
Edited by rockb on Jun 17, 2022 - 03:40 PM. -
- Rank: Mate
- Registered: Nov 22, 2012
- Last visit: Dec 05, 2024
- Posts: 415
Posted: Jul 05, 2022 - 05:54 PM
I'm not able to load your pictures.
I have a spare Prindle traveler, let me look if it has rollers. I do recall some of the P-16s and 18s did not have rollers as they learned over time they were needed. If you use a tightly woven line (unfortunately higher dollar), it can slide around the "shackle" of the traveler. If you start doing a lot of racing where you will be adjusting the traveler a lot, then it will cause an issue over time. But, I think for day sails where you might adjust the traveler 2-3 times a day, it will be fine. Of course, rollers will make it function better.
--
Scott
Prindle Fleet 2
TCDYC
Prindle 18-2 Mod "FrankenKitty"
Tornado Classic "Fast Furniture"
Prindle 19 "Mr. Wiggly"
Nacra 5.8 "De ja vu"
Nacra 5.0
Nacra 5.8
Tornadoes (Reg White)
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.