spreader bar discomfort
-
- Rank: Mate
- Registered: Sep 23, 2022
- Last visit: Nov 15, 2024
- Posts: 104
Posted: Apr 10, 2023 - 11:36 AM
I have never used one before, and am finding that it wants to dig in to my torso to the point where it's too uncomfortable to use. Any tips on what I might be doing wrong? It's a Murrays half harness with a 12" spreader bar. -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Apr 10, 2023 - 03:09 PM
i ended up making mine VERY loose - and just hung in it, to avoid it digging into me -
- Rank: Mate
- Registered: Nov 22, 2012
- Last visit: Nov 26, 2024
- Posts: 412
Posted: Apr 10, 2023 - 03:39 PM
"... digging in to my torso..." sounds like the harness is not tight enough at the waist. The trapeze hook should be at waist level. When I get set-up, I will tighten the sides first; pretty tight. Then will snug the other straps to comfort.
--
Scott
Prindle Fleet 2
TCDYC
Prindle 18-2 Mod "FrankenKitty"
Tornado Classic "Fast Furniture"
Prindle 19 "Mr. Wiggly"
Nacra 5.8 "De ja vu"
Nacra 5.0
Nacra 5.8
Tornadoes (Reg White)
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Nov 20, 2024
- Posts: 1460
Posted: Apr 10, 2023 - 06:54 PM
I've used a fixed spreader bar in butt buckets and full harnesses of different types and never had it touching my body in any way. It should be about an inch from your belly when hanging in it, and not uncomfortable when sitting on the hull in it.
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Apr 07, 2017
- Last visit: Nov 21, 2024
- Posts: 367
Posted: Apr 11, 2023 - 07:44 AM
I did the same thing. When it's tight, it pulls the side straps together.
--
Bill Townsend
G-Cat 5.0
Sarasota
-- -
- Rank: Mate
- Registered: Oct 24, 2006
- Last visit: Jun 21, 2023
- Posts: 160
Posted: Apr 18, 2023 - 10:16 AM
Funny enough, I say that if my harness isn't uncomfortable when I put it on, that it isn't tight enough, lol
I crank mine down TIGHT b/c I don't like having the spreader bar far from me.
I had a Murrays harness YEARS ago and didn't like it (it hurt). It may be that the harness isn't right for you. -
- Rank: Mate
- Registered: Nov 22, 2012
- Last visit: Nov 26, 2024
- Posts: 412
Posted: Apr 26, 2023 - 11:58 AM
Looking at the spreader bars I have, there are some that are designed for full harnesses and others for butt buckets. I had one of the full harness bars and the tab on the top would dig into my gut (my gut had grown over the last decade+), but realized that was the discomfort with my. If you have the tab on top, try another bar or cut the tab off.
--
Scott
Prindle Fleet 2
TCDYC
Prindle 18-2 Mod "FrankenKitty"
Tornado Classic "Fast Furniture"
Prindle 19 "Mr. Wiggly"
Nacra 5.8 "De ja vu"
Nacra 5.0
Nacra 5.8
Tornadoes (Reg White)
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Apr 26, 2023 - 06:22 PM
my welder buddy made his own bar - it was 12" vs the 10" bar that Murray's sells. it eliminated the hip pinching -
- Rank: Mate
- Registered: Sep 23, 2022
- Last visit: Nov 15, 2024
- Posts: 104
Posted: Apr 27, 2023 - 03:42 PM
I think you may be on to something. Once hanging, there's no discomfort, but sitting on the tramp or getting into position, I think it IS the upper tab. I'll make sure and then think about removing it, since it's unused.
I appreciate all the insights.
