I put new torlon balls in my 1985 Harken traveller and a few months later its just as sticky as before. What should i look for?
--
John
Nacra 5.0
CT
--
Help, my traveller aint travelling
-
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Apr 14, 2023 - 01:09 PM
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
Posted: Apr 14, 2023 - 02:01 PM
Use Harken one drop, Order on line or a West Marine. -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Apr 14, 2023 - 03:56 PM
Okay will do
--
John
Nacra 5.0
CT
-- -
- Rank: Chief
- Registered: Nov 26, 2009
- Last visit: Aug 10, 2024
- Posts: 2531
Posted: Apr 16, 2023 - 06:41 PM
I’m assuming you’ve tried the easy/free stuff. Scrubbed the track with toothbrush & soapy water. Taken the retainer out, scrubbed the car, & bearings. put them in a bottle of soapy water & shake.
Counted the bearings…you can fit an extra in the race & it won’t slide.
For lube, save the beer tokens. Harkens technical pages used to state, One drop of their like named lube…but if that was not available, one drop of light machine oil such as 3-in-One.
--
Hobie 18 Magnum
Dart 15
Mystere 6.0XL Sold Was a handful solo
Nacra 5.7
Nacra 5.0
Bombardier Invitation (Now officially DEAD)
Various other Dock cluttering WaterCrap
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Apr 17, 2023 - 06:24 AM
I will count the bearing, thanks.
--
John
Nacra 5.0
CT
-- -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Dec 10, 2024
- Posts: 1461
Posted: Apr 19, 2023 - 08:47 PM
+1
Do you sail in salt water? If so, are you soaking the blocks in fresh water after you sail?
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Apr 20, 2023 - 05:40 AM
This is a fresh water boat.
Sadly and as they say in the IT Department, this is a PICNIC problem. (Problem in chair, not in computer). There was no lube used after rebuild. I took it apart and its fine, just bone dry.
Thanks for the help and lets go sailing!!!
--
John
Nacra 5.0
CT
-- -
- Rank: Mate
- Registered: Nov 25, 2015
- Last visit: Jul 17, 2024
- Posts: 661
Posted: Apr 21, 2023 - 07:59 PM
All fixed
--
John
Nacra 5.0
CT
--
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.