Hi all,
My Hobie FX-One has comfort wings.
This season, Putting the starboard wing on is currently not possible for some reason.
The port wing inserts fine.
It feels like something is blocking inserting the starbord wing into the forward beam.
The red circle marks what I suspect blocks the wing.
The boat has not crashed into anything, or been dropped.
Anyone have an idea about what has caused the starboard beam to block the wing?
Also, does it make a difference for the strength of the beam?
And of course, any ideas about fixing the problem, would be great.
Here is an image looking into the forward starboard beam (apologies for the quality):
Edited by jensp on Jun 23, 2023 - 09:04 PM.
--
/Jens
Hobie FX One
--
Problem inserting wing in Hobie FX-One
-
- Rank: Lubber
- Registered: Jul 25, 2015
- Last visit: Jun 23, 2023
- Posts: 9
-
- Rank: Mate
- Registered: Aug 13, 2017
- Last visit: Aug 22, 2024
- Posts: 281
Hi Jens,
Checked the FX-One spare parts list and there is no replacement for the inner reinforcement. To me it seem like they have added a ring of some material in one of the holes, to fit the wing tubes. Is there a reinforcement at the outer bolt too, or just the beam cap? You anyway have to reach it, fix it and put it back. Check the port side to see how it should look.
List:
https://media.hobie.com/d…MTY4NzYxMTY5Ni4xOS4wLjA.
This is your image presented the correct way, click it to zoom:
Edited by revintage on Jun 24, 2023 - 10:18 AM.
--
Brgds
Lars
Frankentri 5.8/5.5/Inter20
Aerow trimaran foiler
https://www.facebook.com/groups/1192604934176635
--