Hi,
Does anyone in the general LA area have an all-aluminum mast they would like to get rid of? The one I'm using has a serious kink that can be seen looking up the luff track. The bend is just above the tang... sail can be hoisted past the bend but the mast is not straight at the top.
--
Kevin Duffy
Leadbetter Beach
Santa Barbara
--
Need a mast...
-
- Rank: Lubber
- Registered: Jan 19, 2015
- Last visit: May 11, 2024
- Posts: 2
Posted: May 11, 2024 - 02:49 PM
-
- Rank: Mate
- Registered: Jul 29, 2015
- Last visit: Dec 12, 2024
- Posts: 594
Posted: May 11, 2024 - 11:01 PM
What is the boat?
--
Tom
NACRA 5.7 (1984 Sail 181)
Pennsylvania
-- -
- Rank: Mate
- Registered: Apr 07, 2017
- Last visit: Dec 14, 2024
- Posts: 369
Posted: May 12, 2024 - 06:30 PM
A lot of mast extrusions are the same. You may find one that's longer so you'll have to cut it down and reinstall your existing hardware on the new one.
--
Bill Townsend
G-Cat 5.0
Sarasota
-- -
- Rank: Lubber
- Registered: Feb 14, 2022
- Last visit: Jul 12, 2024
- Posts: 6
Posted: Jun 15, 2024 - 12:44 PM
I have a Sailcraft Tornado mast (approx. 31 feet long). $400 -
- Rank: Lubber
- Registered: Sep 01, 2012
- Last visit: Oct 16, 2024
- Posts: 4
Posted: Jun 18, 2024 - 03:04 AM
I have a Nacra 5.8NA mast its 30ft long. located in San Diego
Edited by seanziepop on Jun 18, 2024 - 02:05 AM.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.