Port hull near leading edge.. small area
I would like to inject the area with epoxy..
So I'll have it up on its side..how thick is the
Layup.. so I dont drill thru..
Any one know if Randy Smyth is still around.. got my jib from him
In member album carl2
Edited by carl2 on Aug 31, 2024 - 01:06 PM.
Prindle 19 small delam area port hull
-
- Rank: Mate
- Registered: Oct 13, 2003
- Last visit: Sep 05, 2024
- Posts: 111
-
- Rank: Mate
- Registered: Oct 13, 2003
- Last visit: Sep 05, 2024
- Posts: 111
-
- Rank: Mate
- Registered: Oct 13, 2003
- Last visit: Sep 05, 2024
- Posts: 111
Bump
Any advice on fixing this?
There must be some Prindle guys here.. you'd think......
Edited by carl2 on Sep 03, 2024 - 10:01 PM.