Welcome anonymous guest

Please Support
TheBeachcats.com

Prindle 19 small delam area port hull  Bottom

  • carl2
    carl2
    Mate
    • Rank: Mate
    • Registered: Oct 13, 2003
    • Last visit: Sep 05, 2024
    • Posts: 111
    Link to this post Posted: Aug 31, 2024 - 12:32 PM
    Port hull near leading edge.. small area
    I would like to inject the area with epoxy..
    So I'll have it up on its side..how thick is the
    Layup.. so I dont drill thru..
    Any one know if Randy Smyth is still around.. got my jib from him
    https://www.thebeachcats.com/pictures?g2_itemId=138395
    In member album carl2



    Edited by carl2 on Aug 31, 2024 - 01:06 PM.
  • carl2
    carl2
    Mate
    • Rank: Mate
    • Registered: Oct 13, 2003
    • Last visit: Sep 05, 2024
    • Posts: 111
    Link to this post Posted: Aug 31, 2024 - 02:27 PM
    https://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=138396&g2_serialNumber=4
  • carl2
    carl2
    Mate
    • Rank: Mate
    • Registered: Oct 13, 2003
    • Last visit: Sep 05, 2024
    • Posts: 111
    Link to this post Posted: Sep 03, 2024 - 08:48 AM
    carl2https://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=138396&g2_serialNumber=4

    Bump
    Any advice on fixing this?
    There must be some Prindle guys here.. you'd think......



    Edited by carl2 on Sep 03, 2024 - 10:01 PM.

No HTML tags allowed (except inside [code][/code] tags)

  • Options

Users on-line

This list is based on users active over the last 60 minutes.

Search The Beachcats