tiller repair
-
- Rank: Mate
- Registered: Sep 23, 2022
- Last visit: Dec 15, 2024
- Posts: 111
Posted: Sep 23, 2024 - 05:18 PM
In my inimitable style, I broke the Murrays fiberglass tiller I was using. For repair - any ideas? Epoxy + rod inside, or sleeve outside? -
- Rank: Mate
- Registered: Sep 23, 2022
- Last visit: Dec 15, 2024
- Posts: 111
Posted: Sep 25, 2024 - 12:47 PM
Thanks, 'Guest!' -
- Rank: Chief
- Registered: Apr 19, 2011
- Last visit: Dec 10, 2024
- Posts: 1461
Posted: Sep 25, 2024 - 07:42 PM
Westmatt,
What style tiller have you?
One piece, fixed length, any coatings on the outside?
Have you called Murray's to see what they suggest?
--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
-- -
- Rank: Mate
- Registered: Sep 23, 2022
- Last visit: Dec 15, 2024
- Posts: 111
Posted: Sep 25, 2024 - 08:34 PM
I got a 16" piece of carbon fiber tube that fits nicely inside the fixed length fiberglass tube of the tiller - I will epoxy that inside and I think i'll be ready to go.
thanks,
-Matt -
- Rank: Mate
- Registered: Jun 30, 2018
- Last visit: Dec 15, 2024
- Posts: 598
Posted: Sep 30, 2024 - 10:51 PM
Just be sure to clean the tube and tiller, sand both, wipe with acetone and use a longer setting epoxy. Butter up the insides as well as tubing to ensure you get a full bond. It’ll work
--
Chuck C
NACRA 500 Mk2
Hobie 21se (sold)
-- -
- Rank: Mate
- Registered: Sep 23, 2022
- Last visit: Dec 15, 2024
- Posts: 111
Posted: Oct 01, 2024 - 12:39 PM
Yeah, it worked like a charm. Unless you're really looking, you don't notice the repair.
-Matt
