Welcome anonymous guest

Please Support
TheBeachcats.com

Hobie Getaway Twist Hatch lid  Bottom

  • I am trying to find out if these hatches have a Seal on the LID? I know there is one for the hatch part that is screwed to the Hull but when it Rains it comes in the lid so there has to be some gasket I just dont know where to get it. Would anyone know this? thanks

    --
    1980 Reynolds 21 Catamaran #38
    1988 Farrier 27 # 31
    2002 Hobie Getaway
    Pennsylvania, PA.
    --
  • Murrays should have them, if it's the round ports. Some folks on ebay sell different sized o-rings, not sure about the fitment for your boat.
  • https://westcoastsailing.net/hobie-rectangular-twist-and-seal-hatch-gasket/

    Looks like this might be what you're looking for? It says 'kayak,' but the Getaway parts list shows the same P/N.

    HOBIE TWIST AND SEAL HATCH 37370020 GASKET 71707002 (REQ 2) SCREWS 8032120 (REQ 14) 5" HATCH (INSIDE) 41370000 DRAIN ELBOW FITTING 37370036



    Edited by westmatt on Jan 23, 2025 - 10:46 AM.
  • Nope, sorry, that's not it - that's the hatch to deck seal.

    In tiny print on the Getaway parts list, it says:

    "ORIGINAL HATCH* * Replacement "O" Ring Seal # SPA-4SEAL-S Available from imtra.com Not stocked by Hobie Cat

    https://www.imtra.com/products/product-search?quicksearch=spa-4seal-s&producttypeid=508&productid=26091

    O-ring is misleading - doesn't look like an o-ring to me, but I think it's what you're looking for, and I'll shut up now.



    Edited by westmatt on Jan 23, 2025 - 12:56 PM.
  • Thanks I will look into these links. Thanks for looking

    --
    1980 Reynolds 21 Catamaran #38
    1988 Farrier 27 # 31
    2002 Hobie Getaway
    Pennsylvania, PA.
    --

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.