Any pics of the riging on a prindle 16 ?

rebell

Rank: Lubber

Registered: Aug 18, 2008

Last visit: Dec 20, 2008

Posts: 6
Posted: Aug 18, 2008 - 06:35 PM

Think of me as a 2 year old, i bought the boat and have no idea how to set it up. LOL I don't know any of the proper terms .....so were the wires go!!
Deepsees

Rank: Mate

Registered: Mar 02, 2003

Last visit: Jun 09, 2010

Posts: 119
Posted: Aug 18, 2008 - 10:44 PM

I am not sure where I found it, but there is a Prindle manual on line that shows everything you need to know. I do not see a way to attach it to this post.
rebell

Rank: Lubber

Registered: Aug 18, 2008

Last visit: Dec 20, 2008

Posts: 6
Posted: Aug 19, 2008 - 06:52 AM

Thanks's Deepsees i did find under pic's a manual for the 18' foot that should help a little. We started setting it up last night.... ooooboy that mast is taller than it looked on the trailer...not up yet
northerncat

Rank: Lubber

Registered: Mar 11, 2008

Last visit: Jul 16, 2009

Posts: 50
Posted: Aug 19, 2008 - 08:01 AM

You can find the manuals on Peformance Catamaran website.

here's a link to the manuals
http://www.performancecat.com/prindle/

The P16 is a great cat...I prefer my P16 to over my H16.
It is very forgiving.

Enjoy the speed!
MN3

Rank: Master Chief

Registered: Jun 20, 2006

Last visit: Dec 04, 2024

Posts: 7090
Posted: Aug 19, 2008 - 09:54 AM

This link has set up info for the P 15,16 & 18

http://www.performancecat.com/prindle/pdffiles/Prindle151618Manual.pdf

edited by: andrewscott, Aug 19, 2008 - 09:55 AM
bigbunk03

Rank: Lubber

Registered: Apr 09, 2008

Last visit: Aug 23, 2008

Posts: 6
Posted: Aug 19, 2008 - 01:40 PM

I have a Prindle 16 and can help you out if you have a specific question. The manual is pretty old and the pictures are grainy. Some of the things might not apply depending on what year your boat is. Look on the back of the hull and the last two numbers of the serial number are the year.
rebell

Rank: Lubber

Registered: Aug 18, 2008

Last visit: Dec 20, 2008

Posts: 6
Posted: Aug 19, 2008 - 08:29 PM

Ok now were cooking!! Thank's for all the help...looks like all the connections are there and wires located. Just put on the trampoline. Maybe Wendsday we will raise the mast.
bigbunk03 my Prindle is a 84
nubornbc

Rank: Lubber

Registered: Apr 03, 2004

Last visit: Aug 20, 2008

Posts: 1
Posted: Aug 19, 2008 - 10:42 PM

Learn how to sail before you take your wife out.
rebell

Rank: Lubber

Registered: Aug 18, 2008

Last visit: Dec 20, 2008

Posts: 6
Posted: Aug 24, 2008 - 07:29 PM

The prindle is coming together, looks like i'm missing the rod going to the rudder and the pin's? that connect the rudders to the boat
Quarath

Rank: Mate

Registered: Jul 06, 2008

Last visit: Jul 19, 2018

Posts: 986
Posted: Aug 25, 2008 - 03:01 AM

I was looking at a Prindle 16 that was only part there the other day and I am pretty sure the rudder castings are the same as my Prindle 18. I actually use a set of Hobie 18 pins to mount my rudder castings and it worked great.

Otherwise you can call Pete Begle at 909-800-5237. He hooked me up with several parts I needed for my 18 for good prices. By parts I mean used parts though he can get new as well. He is at Big Bear Lake in CA but can ship wherever.

When you raise the mast the first time have lots of help there. Our first time was pretty scary. We seem to have pretty well down now and we can almost do it with 1 or 2 people but I still like to have my son close if I need him. 16 should not be as bad as the 18 was. Just make sure you take into account that the mast will rotate from it's side 90 degrees to face forwards once it is up and make sure you hook your side stays up with that in mind or will have the problem we had which required me and my son to hold the mast straight up while my wife rushed around and undid and reconnected the stays correctly while the mast had no support but me and my 14 year old son. It was pretty scary.

--
Dustin Finlinson • Magna, UT
Member: Utah Sailing Association
1982 Prindle 18
1986 Hobie 17
1982 Prindle 16
1980 Prindle 16(mostly)
1976 Prindle 16(mostly)
Check out "Prindle Sailors" on Facebook.
--
rebell

Rank: Lubber

Registered: Aug 18, 2008

Last visit: Dec 20, 2008

Posts: 6
Posted: Aug 25, 2008 - 05:38 AM

Thank's I will call him today. Yeah that mast was a white nuckle experiance...when i bought it i thought i was twenty ...looks like i'm showing my age.