2nd Question. Does anyone know if a vinyl tramp can be repaired once it starts to tear, and if so, where or who does such repairs? I would also like my sails looked at to see if they need to be renewed, such as having the stitching redone, batton pockets checked, as well as the bolt rope.
--
TurboHobo
H14T
H16
P18
G-Cat 5.0
P16
--
Tramp Repair
-
- Rank: Mate
- Registered: Oct 19, 2006
- Last visit: Aug 16, 2017
- Posts: 613
Posted: Sep 24, 2008 - 09:03 AM
-
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Sep 24, 2008 - 01:15 PM
you can repair tramps by having new material sewn in as a patch. most small holes dont need repair as they usually dont creep (increase). but larger holes and tears need attention. you DONT want to fall through while stepping the mast....
you should find a local sail shop to look at your sails, or find your local hobie dealer.. dont trust anyone else for your sails. A marine cover shop or will not know the correct way to repair your bolt rope, or know if your sails are shot. -
- Rank: Lubber
- Registered: Sep 19, 2008
- Last visit: Jul 06, 2010
- Posts: 10
Posted: Sep 25, 2008 - 03:12 AM
Has anyone ever dealt with SLO sails? I am looking at a new tramp for my Prindle from them. They offer relatively inexpensive one, about 100 dollars less than the next guy. -
- Rank: Lubber
- Registered: Jul 10, 2008
- Last visit: Sep 30, 2008
- Posts: 11
Posted: Sep 25, 2008 - 11:10 AM
I just ordered a tramp from SLO for a Solcat 18. I have 3 sails on it. It has great craftmanship and is built for fat guys. Karl was awesome to deal with and I had it in a week.
Scott
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.