Hello everyone, I'm new to the board, but I have been reading posts for a while now. I've been sailing cats for two summers now and just can't seem to get enough of it!
Question: Myself and a group of friends sail catamarans in the west bay of grand traverse bay MI. We leave our cats moored all season in the bay. We have no desire to trailer our cats every time we use them. I've heard some talk that this may not be so good for the cats. The fact that it's a bay means they are somewhat protected from large waves. however, there is no protection from the sun. I would like to hear from others about this and maybe some tips to keeping our cats protected from the nasties of Motherr nature. (won't accept the word moth er)
TIA
Jim
Mooring a catamaran
-
- Rank: Lubber
- Registered: Jan 22, 2009
- Last visit: Nov 23, 2014
- Posts: 99
Posted: Mar 07, 2009 - 04:33 PM
-
- Rank: Mate
- Registered: Apr 26, 2004
- Last visit: Nov 05, 2024
- Posts: 399
Posted: Mar 08, 2009 - 04:55 AM
Moorin is NOT a good idea...as far as the sun goes, cover it. sun will fade it....
--
~ Vietnam Vet 69-71~ 17 Hobie w/big jib, ~18 Hobie mag,~DN Ice sailor,
and other toys.......
~~ I live in NY state on the north shore of Oneida lake in
Bernhards Bay. ~~~~~~
-- -
- Rank: Mate
- Registered: Sep 05, 2004
- Last visit: Oct 19, 2015
- Posts: 327
Posted: Mar 08, 2009 - 07:24 PM
Not a great idea but it is done. If you must, keep rigging tight and bungee anything that can move. If a dock, I used to use a three part mooring system to keep my boat from moving and bumpers. If on a bouy, I assume your cat can shift around to keep bows into the wind. You can use those blue tarps to cover the tramp.
Mooring beats the hell out of the boat so check her over frequently.
Other issue is crap that build up on hulls even in fresh water. I used to have to use Muriatic acid to get it off. On my lake it was algae and fuel residue. Salt is another story, my pal used anti fouling paint on his hulls -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Mar 09, 2009 - 05:13 PM
Not a good idea for more than a few days at most.
The constant heating and cooling effect INSIDE the hulls will lead to condensation / capillary action (water swelling the fibers) and can lead to soft spots, leaks, holes etc... -
- Rank: Lubber
- Registered: Feb 28, 2009
- Last visit: May 24, 2009
- Posts: 11
Posted: Mar 13, 2009 - 12:31 AM
i believe i would try not to moor it if possible....but perhaps that is because several boats i had on a mooring over the years, got somehting stolen off them at one time or another...
pirates man, they make it hard on everybody... -
- Rank: Lubber
- Registered: Mar 26, 2008
- Last visit: Mar 24, 2009
- Posts: 3
Posted: Mar 24, 2009 - 12:04 AM
if the water is shallow enough it is possible to build a set of racks for the cats. i store 2 hobie 16's and a 14 turbo on racks. it keeps the boats out of the water so they dont get the build up on the hulls and keeps them stable -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Mar 24, 2009 - 12:54 PM
Some cool stuff pops up in the classifieds. I'm trying to get more details, but here is a hydraulic lift for a Tornado.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Master Chief
- Registered: Jun 20, 2006
- Last visit: May 22, 2024
- Posts: 7089
Posted: Mar 24, 2009 - 02:24 PM
ahhhh hydraulic ... i was wondering how he got the boat up there! :) -
- Rank: Lubber
- Registered: Dec 21, 2003
- Last visit: Aug 09, 2010
- Posts: 22
Posted: Mar 29, 2009 - 09:31 PM
Hi E-trade : I have stored my cats( P-16,P-18 & P-19) on a float for over 15 years. I wish I had the set up that Damon L describes because that's the easiest & the best !
My float is made of 2x10 treated lumber & galvanized bolts & nails as fasteners to hold it together . For floatation, I installed under the hulls lumber, just enough pieces of marine grade styrofoam ( each 24"x48"x16")to keep the hulls out of the water when I am not standing on the float. Having the hulls close to but not in the water keeps them clean & easy to move on & off the float. I installed carpeting on the lumber under the hulls only , so when I step on the float it gets wet & makes the moving of the cat easier .I use heavy 1/2" galvanized Eye bolts & 1/2" Nylon lines spliced with thimbles to secure the float to my mooring & slip .
In the Winter, I store the cat on the float at a mooring without the mast,boom,rudders & sails. I cover the cat with a summer cover & a winter heavy plastic to protect it from the sun & seaguls . In the Summer I keep the float in a slip. I am 70 & when soloing, & don't want to waste energy pulling & pushing the cat on & off the float ,so I installed a manual winch to do the work .... If you are intersted in how it is done on the float, get back to me for the details. Bill -
- Rank: Lubber
- Registered: Jan 22, 2009
- Last visit: Nov 23, 2014
- Posts: 99
Posted: Apr 08, 2009 - 09:38 PM
Hi Bilsails,
Sounds like a good system you have there. Unfortunately I can not put a permanent structure in the bay. I believe it is city property. I will keep it in mind for future reference.
Thanks, formerly etader
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.