Hey everyone, my name is Keith. I just bought my first sail boat for $600 with a trailer. It's a Prindle 16. The boat, rigging, trampoline and harnesses are in great shape. I did not realize until i got all the way home that the mast had been broke in half and welded back together. Being a professional welder i know that the welds are bad, but besides that the he cut about 4 inches out of the mast. Now the rigging and the Main sail are to long.
how do i go about buying a new mast? I here that i can just buy the extruded alumium and swap all my parts over, but i don't know where to buy it or how long it should be since mine is about 4 inches short.
Prindle 16- Broke mast
-
- Rank: Lubber
- Registered: Mar 25, 2009
- Last visit: Jun 15, 2010
- Posts: 54
-
- Rank: Mate
- Registered: Aug 06, 2004
- Last visit: Oct 20, 2024
- Posts: 878
There are plenty of used mast available. You should put your location in your post. -
- Rank: Lubber
- Registered: Mar 25, 2009
- Last visit: Jun 15, 2010
- Posts: 54
-
- Rank: Lubber
- Registered: Oct 26, 2004
- Last visit: Nov 27, 2013
- Posts: 66
-
- Rank: Mate
- Registered: Feb 06, 2009
- Last visit: Jun 25, 2017
- Posts: 223
Welded with no supporting outer or inner sleeve attached with rivets or screws? Just a weld? Either way, you need those missing four inches.
I have seen masts that have been repaired successfully on monohulls, but a good mast repair would limit flexibility due to supporting materials. My P18 mast is a cooked noodle compared to the mast on my former Mac 25.
edited by: kgatesman, Apr 01, 2009 - 10:02 AM -
- Rank: Lubber
- Registered: Mar 25, 2009
- Last visit: Jun 15, 2010
- Posts: 54
Thats a haul for me, but thanks for the help. Hoping on something a little closer.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.