I have a 14 Turbo (converted from unirig) that has the jib blocks on the front crossbar. As a result, I cannot get the right sheeting angles on the jib. Can I get the wire for under the tramp, and the proper blocks for the conversion? I believe I can modify the tramp with grommets to accept them.
Many thanks. I am new to cat sailing, and appreciate any and all suggestions.
Hobie 14 Turbo Jib blocks
-
- Rank: Lubber
- Registered: Oct 09, 2007
- Last visit: Oct 11, 2007
- Posts: 2
Posted: Oct 09, 2007 - 04:53 PM
-
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Oct 10, 2007 - 06:29 PM
I'm sure you can still get the parts from any Hobie Dealer, they still sell the Hobie 14 Turbo Kit on page 16 of the current catalog.
Make sure your Hobie 14 has a dolphin striker if you are running a jib. It might help get you setup if you look at the Hobie 14 Turbo instructions. It shows where to put the holes in the tramp for the jib blocks.
http://www.hobiecat.com/s…port/pdfs/e_turbojib.pdf
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Oct 10, 2007 - 07:51 PM
Since you've got a Hobie 14 you might want to look at Bob Curry's (champion H14 sailor) tips in this article
http://www.thebeachcats.com/Article84.html
[mg2:11193]
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Lubber
- Registered: Oct 09, 2007
- Last visit: Oct 11, 2007
- Posts: 2
Posted: Oct 11, 2007 - 10:14 AM
Just the help I needed! Thanks for the info.
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.