Hi
Where can I find a replacement clevis pin for the gooseneck on my Prindle 18? Its 1/4" x 1-1/2", which I believe is also the same for all prindles.
Thanks for any advice,
SR
--
Rob
OKC
Pile of Nacra parts..
--
Gooseneck Clevis Pin
-
- Rank: Mate
- Registered: Aug 22, 2007
- Last visit: Jan 07, 2015
- Posts: 742
Posted: Nov 24, 2007 - 10:37 PM
-
- Rank: Administrator
- Registered: Jul 19, 2001
- Last visit: Nov 15, 2024
- Posts: 3446
Posted: Nov 25, 2007 - 01:25 PM
Depends on where you are located. That's a pretty common item, should be available at any marine store, or catamaran dealer. Fill out your profile (click the profile link in the main menu) and folks can help you better.
--
Damon Linkous
1992 Hobie 18
Memphis, TN
How To Create Your Signature
How To Create Your Own Cool Avatar
How To Display Pictures In The Forums.
-- -
- Rank: Lubber
- Registered: Jan 13, 2007
- Last visit: Dec 06, 2007
- Posts: 15
Posted: Nov 25, 2007 - 07:14 PM
Most dealers should have something that will work, like Damon said, where are you located? -
- Rank: Lubber
- Registered: Dec 01, 2006
- Last visit: Nov 26, 2007
- Posts: 1
Posted: Nov 26, 2007 - 06:57 PM
In a bind on any of the Prindle Cats and the Nacras with booms, They all use the box between the boom and attachment point on the mast. A 1 1/2" X 1/4/20 HEX head bolt works fine with a nylock nut. I would normally take one of the pins out and replace it with a bolt to not lose the box.
Kirk Newkirk
Users on-line
- 0 users
This list is based on users active over the last 60 minutes.