Login
Albums Beachcats Technical Repairing Dent In Mast
Search All Albums

Repairing Dent In Mast

Repairing a dent in a mast sail track

I have had two masts that had a dent near the sail track, and was able to repair them with this method. Here's a photo of the Prindle 19 mast that I just received. As you can see, the area is pinched enough to cause problems when raising the main.

I use thin, hardened metal as spacers that spread out the pressure that is applied with a tapered device. In other words, I drive a screwdriver in between a couple putty knives. To keep the straight side from getting damaged, be sure to use a thicker piece of metal as a backer on that side. I started out with two putty knives and advanced to a heavier piece of stainless steel when the track was opened up a little. As you can see in the following photos, it does a great job of opening the track back up.

When you have a straight opening in the groove, you might touch up the area with a fine metal file.

Good luck.


Jack Hoying

Fort Loramie, Ohio

Date: 12/15/2005
Owner: Damon Linkous
Size: 4 items
mastfix1.jpg
Date: 12/15/2005
Views: 1279
mastfix2.jpg
Date: 12/15/2005
Views: 1384
mastfix3.jpg
Date: 12/15/2005
Views: 1271
mastfix4.jpg
Date: 12/15/2005
Views: 1245
Page: 1