|
IMG_1022
cleaning seam with razor knife
Date: 05/12/2010
Views: 1086
|
IMG_1025
wipe down with lacquer thinner
Date: 05/12/2010
Views: 924
|
IMG_1026
masking everything off to keep from making a mess
Date: 05/12/2010
Views: 933
|
IMG_1031
I measured out every two inches
Date: 05/12/2010
Views: 950
|
|
IMG_1032
drilled holes with 9/64 drill. I marked the depth with a piece of tape so as not to go all the way through.
Date: 05/12/2010
Views: 959
|
IMG_1034
I put a small piece of tape between each hole so once the epoxy was injected I could cover the hole to keep it from coming back out.
Date: 05/12/2010
Views: 1061
|
IMG_1037
after the epoxy had dried a little I pulled all the tape/ masking paper off and wiped everything off with lacquer thinner
Date: 05/13/2010
Views: 1009
|
IMG_1040
the seam is full now and should have plenty epoxy above it make the repair solid. I will do a leak test soon to make sure the repair is seaworthy.
Date: 05/13/2010
Views: 1053
|