|
IMG_20130906_180815
Date: 09/06/2013
Views: 1360
|
IMG_20130906_180844
Date: 09/06/2013
Views: 1287
|
IMG_20130906_180925
Date: 09/06/2013
Views: 1232
|
IMG_20130906_180951
Date: 09/06/2013
Views: 1318
|
|
20130902_082515
Date: 09/06/2013
Views: 1314
|
IMG_20130906_193242
Date: 09/06/2013
Views: 1386
|
IMG_20130907_173726
What pine needles look like after thirty years............
Date: 09/07/2013
Views: 1253
|
IMG_20130910_164230
Date: 09/11/2013
Views: 1147
|
|
IMG_20130910_165016
Date: 09/11/2013
Views: 1331
|
IMG_20130910_172016
Date: 09/11/2013
Views: 1304
|
IMG_20130912_184026
Date: 09/12/2013
Views: 1289
|
IMG_20130912_193826
Cutting board bushings
Date: 09/12/2013
Views: 1213
|
|
IMG_20130914_112850
Rudder blocks
Date: 09/14/2013
Views: 1203
|
IMG_20130914_112844
Mast stepper
Date: 09/14/2013
Views: 1291
|
IMG_20130914_112822
Two inch velcro straps with duct tape pulls
Date: 09/14/2013
Views: 1280
|
IMG_20130914_112805
New Mast support up front
Date: 09/14/2013
Views: 1255
|
|
IMG_20130913_141320
Almost read
Date: 09/14/2013
Views: 1259
|
IMG_20131013_154454
Mast cradle setup. Made from plywood. Sits nice and firm.
Date: 05/04/2014
Views: 1216
|
IMG_20131013_154509
Example of how I Leave my wires in place and just coil them for transport. Little velcro straps are used to fasten the wires to the hiking straps.
Date: 05/04/2014
Views: 1304
|
IMG_20131013_154503
I also keep the mainsheet and blocks on the boat while trailering.
Date: 05/04/2014
Views: 1123
|
|
IMG_20140319_125209
I modified the outhaul to my boom so I can easily adjust it while sailing.
Date: 05/04/2014
Views: 1122
|
IMG_20140321_154758
My beach wheel mount for the trailer.
Date: 05/04/2014
Views: 1213
|
IMG_20140402_142639
Mast step modification. I made this plate that will get bolt to the inside of the mast. I had o do this because the previous owner mangled both sides of the base, and a cople holes were large enough for a 3/8 bolt. This has worked great. Very strong.
Date: 05/04/2014
Views: 1191
|
IMG_20140407_095934
Using 600 then 1000 grit sand paper, followed with buffing compound and wax, brought the shine back to a very oxidized hull.
Date: 05/04/2014
Views: 1226
|
|
IMG_20140427_150029
Home made toy box for trailer.
Date: 05/04/2014
Views: 1279
|
IMG_20140319_135922
Upper block with pigtail and quick release.
Date: 05/08/2014
Views: 1293
|
IMG_20140319_161904
Downhaul setup. It will need much longer line, but yo get the picture.
Date: 05/08/2014
Views: 1126
|
IMG_20140622_080850
inside Prindle
Date: 06/22/2014
Views: 1194
|
|
DSC00078
Great day
Date: 06/23/2014
Views: 1293
|
DSC00079
Great Day2
Date: 06/23/2014
Views: 1334
|
|
|
