|
IMG_5120
Aluminum, easily customized Cat trailer.
These trailers are light, mostly corrosion proof, & very easy to modify via captive bolts that slide in slots in the extrusions.
Date: 11/22/2016
Views: 1030
|
IMG_5117
How rear beam & roller are attached
Date: 11/22/2016
Views: 998
|
IMG_5118
Mast stand attachment. It can easily be slid fore/aft.
Date: 11/22/2016
Views: 1158
|
IMG_5119
Front beam & cradle attachments.
Date: 11/22/2016
Views: 952
|
|
IMG_5121
Rear beam, cradle & light fittings
Date: 11/22/2016
Views: 994
|
IMG_5123
How front beam attaches. Rear is the same. This is one item that has to remain in the factory place,(fore/aft wise). It provides stiffness to the frame where the rails angle in. You can move the cradles to suit your boat. My 5.7 is not totally centred as
Date: 11/22/2016
Views: 1023
|
IMG_5124
Lights mount on an aluminum strip on rear beam. Rear beam can be slid fore/aft, within reason.
I fished new wires through the frame, out the end,(protected by wire loom), then tucked the loom into the channel in frame, secured by tape, then to...
Date: 11/22/2016
Views: 1043
|
IMG_5122
Mast support
Date: 11/22/2016
Views: 1111
|
