|
A take on building replacement rudders
Building some replacement rudders
Date: 02/07/2022
Owner: Charles Carlisle
Size: 10 items
Views: 328
|
20210925_105511_resized
Final (???) retrofit and all ready to go. Next improvements are all gravy.
Date: 11/04/2021
Views: 381
|
Shackle
Warped, forged 5/16 bow shackle from hound - likeley warped from forces winching up mast.
Date: 07/02/2021
Views: 391
|
BoatHoleMark
How I marked the hole I was cutting out to make sure it went back in correctly.
Date: 03/22/2021
Views: 443
|
|
20190512_192146_resized
Hole rough repair
Date: 03/22/2021
Views: 405
|
StartingPointResto
This is what we started with 2 years ago. Sailed it, pretty much as-is with new rigging and lines (and no "Big Kahuna").
Date: 03/22/2021
Views: 492
|
CatApart
Taking it apart
Date: 03/22/2021
Views: 426
|
HullRepairBattenSupport
Backing up access hole with some spare fiberglass battens, epoxied in.
Date: 03/22/2021
Views: 422
|
|
Paint03202021
Fresh paint; Interlux 404 Epoxy Primekote 92 layers, wet sanded), Interlux Perfection, Lauderdale blue x 2 layers, wet sanded 220 between coats. Needs one more for better opacity. Spray booth: back yard, under trees.
Date: 03/22/2021
Views: 433
|
WingSocketCarbon2
Carbon wrapped/reinforced wing sockets.
Date: 03/22/2021
Views: 426
|
Redfish09122020
Miscellaneous summary - Heart rate and speed at finish.
Date: 09/14/2020
Views: 578
|
CatTieDown08242020
Tie down before Hurricane Laura
Date: 08/25/2020
Views: 605
|
|
On Trailer 07112020
General shot on trailer; looking closely, you can see shroud "protectors"; surfboard pads meant to go on luggage racks, but say "KO Sailing", ironically...
Date: 07/13/2020
Views: 866
|
Rudder Flop1
Showing tiller over-rotation with "flop" and tiller lock-up. Solution is to "thread-lock" the adjuster with Teflon tape or something like that
Date: 05/08/2020
Views: 578
|
Rudder Flop2
Showing tiller set-up W/O hiking stick
Date: 05/08/2020
Views: 550
|
StartSetup04_25_20
Current Gin Pole set-up; works VERY good.
Date: 04/28/2020
Views: 567
|
|
WiresInBag1
This actually is way cleaner a solution than it appears, and very quick. Needs custom bags with mesh to allow rigging to be rinsed and dried. That's next.
Date: 04/08/2020
Views: 959
|
WIN_20200322_13_44_40_Pro
Trailer mounted jin pole.
Date: 03/22/2020
Views: 658
|
FH21FrontQuart
Front quarter after initial cleanup
Date: 05/21/2019
Views: 982
|
H21Side1
Side view after initial cleanup
Date: 05/21/2019
Views: 1063
|
|
ReplEndCaps
Replacement wing seat end caps off Ad-a-zon. Made for exercise equipment. Thought that was appropriate. Fit perfect/tight. Like $9, shipped for 6.
Date: 05/21/2019
Views: 747
|
20190505_122412_resized
Carbon strips laid out on mylar to make backing plates for replacing cut out
Date: 05/15/2019
Views: 458
|
BustedWingSocket1
REALLY broke up wing socket, from inside
Date: 05/15/2019
Views: 680
|
20190512_101600_resized
Cut out epoxied in place - the tape is a Compac/heat reflective pure aluminum (no plastic) tape with a high strength acrylic adhesive. Sticks and conforms excellently. Worked great. Will use 2 angle pieces next time.
Date: 05/15/2019
Views: 578
|
|
H21HullRepair
Cut out idea and execution
Date: 05/15/2019
Views: 817
|
|
|
|
