|
1
While stepping our mast the starboard roller on the front collapsed. Really glad it did not happen while trailering her to the lake.
Date: 09/06/2010
Views: 1029
|
2
Roller split along seam
Date: 09/06/2010
Views: 1043
|
3
Broken bracket as well
Date: 09/06/2010
Views: 1094
|
4
One person lifts boat, another person removes rollers and inserts cradles. Align boat on trailer as desired. Place single strip of tape from cradle to trailer support for re-alignment later.
Date: 09/06/2010
Views: 936
|
|
5
Cut tape at gap between cradle and trailer for re-alignment later. Slide boat back to gain access to cradle for drilling and bolting.
Date: 09/06/2010
Views: 1143
|
6
Aligning cradle location with tape that was cut
Date: 09/06/2010
Views: 1027
|
7
Mark drill locations
Date: 09/06/2010
Views: 1025
|
8
Drill location marked. We could use one of the existing holes. Pay no attention to the sexy crocs n sox.
Date: 09/06/2010
Views: 998
|
|
9
Drill holes, use lube
Date: 09/06/2010
Views: 1005
|
10
Secure bolt and washer to socket with tape. Fasten bolts.
Date: 09/06/2010
Views: 997
|
11
Date: 09/06/2010
Views: 900
|
12
Cradle centered on trailer support.
Date: 09/06/2010
Views: 1094
|
|
13
Date: 09/06/2010
Views: 932
|
14
Aint she beautiful!
Date: 09/06/2010
Views: 1169
|
|
|
