|
1
While stepping our mast the starboard roller on the front collapsed. Really glad it did not happen while trailering her to the lake.
Date: 09/06/2010
Views: 1031
|
2
Roller split along seam
Date: 09/06/2010
Views: 1045
|
3
Broken bracket as well
Date: 09/06/2010
Views: 1097
|
4
One person lifts boat, another person removes rollers and inserts cradles. Align boat on trailer as desired. Place single strip of tape from cradle to trailer support for re-alignment later.
Date: 09/06/2010
Views: 940
|
|
5
Cut tape at gap between cradle and trailer for re-alignment later. Slide boat back to gain access to cradle for drilling and bolting.
Date: 09/06/2010
Views: 1145
|
6
Aligning cradle location with tape that was cut
Date: 09/06/2010
Views: 1030
|
7
Mark drill locations
Date: 09/06/2010
Views: 1027
|
8
Drill location marked. We could use one of the existing holes. Pay no attention to the sexy crocs n sox.
Date: 09/06/2010
Views: 1001
|
|
9
Drill holes, use lube
Date: 09/06/2010
Views: 1008
|
10
Secure bolt and washer to socket with tape. Fasten bolts.
Date: 09/06/2010
Views: 1000
|
11
Date: 09/06/2010
Views: 903
|
12
Cradle centered on trailer support.
Date: 09/06/2010
Views: 1096
|
|
13
Date: 09/06/2010
Views: 935
|
14
Aint she beautiful!
Date: 09/06/2010
Views: 1172
|
|
|
