|
IMG_0330
Date: 11/22/2010
Views: 972
|
IMG_0329
Front port hull.
Date: 10/04/2010
Views: 914
|
IMG_0338
Mid and aft port hull.
Date: 10/04/2010
Views: 883
|
IMG_0337
Picture of area we worked on.
Date: 10/04/2010
Views: 908
|
|
IMG_0342
Inject away
Date: 10/04/2010
Views: 902
|
IMG_0333
We used a small nail to clear the hole a bit to remove any thing that might clog the injectors tip.
Date: 10/04/2010
Views: 854
|
IMG_0324
The mixed up epoxy ready to go in to the injector.
Date: 10/04/2010
Views: 872
|
IMG_0325
Making our grid lines. We used a thin bar of metal that we could bend to fit around the boat as a ruler. Worked great!
Date: 10/04/2010
Views: 895
|
|
IMG_0319
The epoxy kit and tools.
Date: 10/04/2010
Views: 941
|
IMG_0341
Great way to hold the injector while filling.
Date: 10/04/2010
Views: 946
|
IMG_0328
Drilling out the holes was easy with the dept set and dremel running.
Date: 10/04/2010
Views: 949
|
IMG_0317
Turkey injector with a cut needle and rubber stopper to keep the epoxy from running all over over.
Date: 10/04/2010
Views: 868
|
|
IMG_0318
The tip of the injector and the depth set by the stopper.
Date: 10/04/2010
Views: 955
|
|
|
|
