|
1 Broken hook and fiberglass rod
Broken centerboard hook and 3/4" fiberglass threaded rod used as backbone for hook rebuild.
Date: 11/28/2012
Views: 708
|
2 Mark hole for drilling
File damaged area and mark for drilling. I use a dremel to route out the initial hole area (~1/4" deep)so the 3/4" drill bit will not wonder
Date: 11/28/2012
Views: 767
|
3 hole drilled
3/4" hole drilled to ~ 3" depth along the spine
Date: 11/28/2012
Views: 709
|
4 Rod set in fiberglass resin
Put fiberglass resin in hole ~ half full. Insert threaded fiberglass rod, twins around a little. Wipe off over spill and let set.
Date: 11/28/2012
Views: 705
|
|
5 Hook wrap with rope & resin
Wrap rod with resin impregnated fiberglass rope (string) around rod to build up bulk for hook creation.
Date: 11/28/2012
Views: 704
|
6 Hook shape marked out
Mark hook shape using other centerboard hook as template.
Date: 11/28/2012
Views: 854
|
7 dremel shaped hook
Use dremel (or similiar tool) to shape hook. Paint with white marine epoxy or gelcoat (optional)
Date: 11/28/2012
Views: 802
|
|
