|
DSCN1694
I was sanding down to paint & was chasing this small bubble in the gel coat the turned in to a big crack
Date: 04/22/2013
Views: 1024
|
DSCN1695
Started with on 3" strip of 6 oz. tape on the inside
Date: 04/22/2013
Views: 1017
|
DSCN1699
3 layers of 6 oz cloth under foam filled & shaved to fair
Date: 04/22/2013
Views: 999
|
DSCN1705
Covered with 2 layers of 8 oz. cloth & used a little white in the West System to make it look better.
Date: 04/22/2013
Views: 979
|
|
DSCN1747
Patch fairing & bottom job
Date: 04/22/2013
Views: 930
|
DSCN1922
Added bracing used in boat made after 1989, I think. Used 1/4 inch core cell which looks similar to the other bulkheads on this 1986 built cat.
Date: 04/22/2013
Views: 1024
|
DSCN1921
Copy of top cap bracing using split 3" PCV to make the shape, it is better to set in place while the edges are still damp with west, but the curve is hard enough to hold shape, about 45 minutes before flipping into place.
Date: 04/22/2013
Views: 1033
|
DSCN1931
Clamping on the top caps using one thin coat of West on both sides & a bead of Six-10 West to fill the voids, I used plastic packing tape under the bracing to keep it from bond to the brace & Q-tips to clean the excess
Date: 04/22/2013
Views: 1055
|
