Date: 07/27/2008
Views: 1056
|
Date: 07/27/2008
Views: 1073
|
1-Cut out
I cut out the entire damaged area, leaving a small lip, 1/2 to 3/4 inch around the edges.
Date: 07/08/2009
Views: 885
|
2-Acess Port
I added an access Port
Date: 07/08/2009
Views: 1012
|
|
3-Foam
I made templates with foam core and fiberglass cloth, one to fit inside the void, the other as backing inside the hull
Date: 07/08/2009
Views: 840
|
4-Foam
I changed my mind on the foamcore and added some blueboard covered with mylar. I pushed the white beadboard flotation blocks up against the mylar covered blueboard and placed a weight on it to hold it in place.
Date: 08/11/2009
Views: 847
|
5-Fiber1
I fiberglassed the void and the back of the hull. Almost finished. I think there is too much fiberglass on there, so I will cut an acess port on the other hull and add a bit of wight to balance things out. I use this boat for pleasure, if I raced, I would
Date: 08/11/2009
Views: 1034
|
|
