Notifications
Clear all
Topic starter
Came in too hot at the dock and damaged bow down to fiberglass material
Structure is fine but large chunks of gelcoat need to be repaired
I have been using evercoat formula 27 to repair dings in the blades. West marine guy says I can use this for the bow repair but on further research site says to seal it with gel coat as the polyester resin is not water tight
What do I do/use?
Posted : August 3, 2012 8:12 pm
Use gel coat and add some high density filler.
Posted : August 3, 2012 10:03 pm