Notifications
Clear all
Topic starter
The Hobie 21-SE centerboard pivot pin is held in with (2) flat-head
SS screws that look to be 1" long ; that's what came out
of mine.
Is that Really long enough ; and what should i use to keep them
from backing out when i put them back in ?
Thanks : Bille
Posted : June 2, 2012 12:58 pm
That's what mine had. Put some locktite on the screws. Mine never backed out.
Posted : June 3, 2012 8:45 am
Topic starter
THANKS !!
One Less thing to worry about, and my SE is
getting closer to turning into an actual Catamaran.
Gonna B FUN !
Bille
Posted : June 3, 2012 1:37 pm