Notifications
Clear all
Topic starter
How do I measure mask rake on my H20. Hobie tuning guide talks about rake of 7 to 10 inches. That does not make sense, used to rake numbers measured from the top of the mast to some point on the transom. Hopefully someone here is in the know. Ryan
Posted : June 7, 2014 6:06 pm
Level the hulls & use a trap line as a plumb...
there is a thread somewhere....
Posted : June 8, 2014 12:26 am
Ok Hobie 20 guys, Here's the scoop. It's a series written by Bob Curry in the mid 90's. All you need to know and a whole lot more.
http://thebeachcats.com/pictures/?g2_itemId=109033&g2_imageViewsIndex=1
Posted : June 8, 2014 2:15 am
The bottom of the second page tells you how to measure mast rake.
Posted : June 8, 2014 2:20 am