Notifications
Clear all
Topic starter
I have a h18 that has delaminated from the rear cross bar to the dagger board box. the previous owner sanded off the gelcoat and applied a layer of glass. when i step on the deck it bends in about a half inch and crunches. i have plenty of glass supplies to add more but i am not sure if i should instead inject resin into the hull. I am also in the process of painting the boat so the sooner i finish the glass the better.
edited by: rch701, Jul 06, 2009 - 03:21 PM
Posted : July 6, 2009 10:20 am
Do the injection thing..........
Posted : July 6, 2009 1:14 pm
I have a set of H-18 hulls (white)with croossbeams in good condition, $400, L.A. area.
Posted : July 6, 2009 5:09 pm