Welcome Guest
Catamaran Sailing at TheBeachcats.com Logo
Prindle 18 Rudder K...
 
Notifications
Clear all

Prindle 18 Rudder Kickup

34 Posts
11 Users
0 Reactions
7,527 Views
Jim
 Jim
(@spray_in_the_face)
Posts: 99
Member
 

Damon,

I'll try to get pictures tomorrow.


 
Posted : September 30, 2009 1:27 pm
Dustin Finlinson
(@Quarath)
Posts: 1042
Master Chief Registered
Topic starter
 

I think some people might even do this with a working factory system as a solution to keeping the rudders raised high when on the beach or trailer.

I like the PIN idea for this reason. I wouldn't want to have to try to remember to put or pull a pin while sailing but I would love to have a pin the locked them up for trailering, even if just from setup area to ramp. I quite often setup in a parking lot a little ways away from the ramp and since the water is low the ramp is dry and you actually just drive down the packed sand and launch but it can be bumpy and always worry the rope will bounce out


 
Posted : October 1, 2009 9:54 am
Jim
 Jim
(@spray_in_the_face)
Posts: 99
Member
 

This picture shows the loop for easy grab on the fly.

Keep in mind the pins should be wood or plastic. I used the stainless,but it doesn't offer any protection from a bottom out.


 
Posted : October 1, 2009 1:05 pm
Jim
 Jim
(@spray_in_the_face)
Posts: 99
Member
 


 
Posted : October 1, 2009 1:13 pm
Page 2 / 2
Secret Link