Just testing your new site. 😎
KennyB wrote: Just testing your new site. 😎
Thanks for stopping by, I didn't make the Friday night launch, but I'm still working, should be this weekend.
Not sure if I told you, but I bought a Polycraft / Binks fiberglass chopper system. I had to rebuild/replace some pieces, mostly gaskets and hoses, and am in the process of calibrating the resin, mekp, and glass ratio. After that I'll start making my molds again. 😉
I'm just testing to see if I can upload some pictures<img src="
" alt="" />
I'll try again<img src="
/img]
There are some picture posting instructions in this other thread.
http://www.thebeachcats.com/module-forum-viewtopic-topic-1963.html
also check this post
http://www.thebeachcats.com/module-forum-viewtopic-topic-11541-start-0.html#pid18009
TEst
You've almost got it, you typed
TEst
which is the correct format, but you've only included the name of the file, you also need the Internet address (URL) of where the image is located on the Internet.
Like
TEst
didn't mean to edit your post, hope you got the idea.