Following Damon's advice I removed my tramp in preparation of doing the Poly-Glow treatment on the decks and hulls. When I got it off, I noticed it was pretty dingy. It is especially bad in the folds under the rear laces. This brings up the question, how the heck do you clean one of these things. It is in pretty good condition overall, and i don't want to do anything to damage the fabric. Any suggestions?
Try this:
http://www.sailrite.com/303-Aerospace-Fabric-Vinyl-Cleaner-32oz
Dilute it at least 10 to one. Directions on label.
Sheet In!
Bob
Very few things in life
http://www.sailrite.com/303-Aerospace-Fabric-Vinyl-Cleaner-32oz
work as advertised. This one did! Really easy too. Thanks Bob.
Power washer.
makinmajik wrote: Very few things in life
http://www.sailrite.com/303-Aerospace-Fabric-Vinyl-Cleaner-32oz
work as advertised. This one did! Really easy too. Thanks Bob.
Is this the same stuff?
http://www.amazon.com/303-Fabric-Vinyl-Cleaner-oz/dp/B0007UNHF8/ref=pd_sim_auto_1
makinmajik wrote: Very few things in life
http://www.sailrite.com/303-Aerospace-Fabric-Vinyl-Cleaner-32oz
work as advertised. This one did! Really easy too. Thanks Bob.
My pleasure.
This forum is full of great folks and information.
Thanks Damon!
Edited by klozhald on Jan 19, 2012 - 01:33 PM.